Designed crossing ducts

Command: Crossing Ducts (designed)
Menu path: Conduit > Crossing Ducts > Crossing Duct (designed)
Icons: zute_cijevi16.png  zute_cijevi32.png
Functional description: The command lays down a crossing duct with the property "designed", along user defined path.
 


Crossing Duct (designed) command enables crossing duct laying with pre-defined properties.
By laying in this way, you’ll get the crossing duct with the following properties:


Properties


Crossing Duct:

  • Duct type - (default type, defined in system settings)
  • Number of ducts - (default number of ducts, defined in system settings)
  • Duct diameter - (default diameter, defined in system settings)
  • Construction method  - (crossing ducts construction method, defined in system settings)
  • Pathway type - (defined in system settings)
  • Duct bank status - Designed
  • Included in BOQ - (Yes)
  • Year built - (current year is offered)

Duct bank length

  • Duct length - length obtained from the drawing
  • Fixed length - 0.0 (i.e. not entered)

TCG Global properties:

  • TCG Object identifier - (identification number)
  • Note - (write a note that refers to the selected crossing duct)
  • Owner - (infrastructure owner)
  • User - (infrastructure user)

properties_prelaz_projektovan.png

Figure 1

These properties can be changed in Properties window (Figure 1).


Laying procedure

The procedure of crossing ducts laying is the same for all three cases (designed, existing and pre-defined).
The only difference is in the properties assigned to the crossing ducts after drawing.
The very laying procedure is described on Crossing Duct Laying page.